BLOOD GAS & ELECTROLYTE SYSTEM
Epoc® NXS Blood Gas Analyzer
The epoc® NXS Blood Gas Analyzer System is a handheld, wireless POC testing solution that provides blood gas, basic metabolic panel with hematocrit, and lactate results at the bedside in less than 1 minute.
By moving patient testing to the bedside, patients, caregivers, and the laboratory benefit from a simpler, more efficient process that may improve turnaround times and operational efficiencies while reducing costs.
Epoc® NXS Blood Gas Analyzer
The epoc® NXS Blood Gas Analyzer System is a handheld, wireless POC testing solution that provides blood gas, basic metabolic panel with hematocrit, and lactate results at the bedside in less than 1 minute.
By moving patient testing to the bedside, patients, caregivers, and the laboratory benefit from a simpler, more efficient process that may improve turnaround times and operational efficiencies while reducing costs.
Available on
Epoc® NXS Blood Gas Analyzer
The epoc® NXS Blood Gas Analyzer System is a handheld, wireless POC testing solution that provides blood gas, basic metabolic panel with hematocrit, and lactate results at the bedside in less than 1 minute.
By moving patient testing to the bedside, patients, caregivers, and the laboratory benefit from a simpler, more efficient process that may improve turnaround times and operational efficiencies while reducing costs.
RAPIDPoint® 500e Blood Gas System
The RAPIDPoint® 500e System elevates Siemens Healthineers blood gas offering to a new level, allowing you to spend more time focused on patient care. Implement a proven end-to-end blood gas solution that reduces the daily burden of device management and enables you to give your full care and attention where it matters most.
Specification:
- Processing Time : 60 seconds
- Quality Control : Automated QC
RAPIDPoint® 500e Blood Gas System
The RAPIDPoint® 500e System elevates Siemens Healthineers blood gas offering to a new level, allowing you to spend more time focused on patient care. Implement a proven end-to-end blood gas solution that reduces the daily burden of device management and enables you to give your full care and attention where it matters most.
Specification:
- Processing Time : 60 seconds
- Quality Control : Automated QC
Available on
RAPIDPoint® 500e Blood Gas System
The RAPIDPoint® 500e System elevates Siemens Healthineers blood gas offering to a new level, allowing you to spend more time focused on patient care. Implement a proven end-to-end blood gas solution that reduces the daily burden of device management and enables you to give your full care and attention where it matters most.
Specification:
- Processing Time : 60 seconds
- Quality Control : Automated QC
RAPIDLab® 348EX Blood Gas System
is the cost-effective solution for smaller laboratories tasked with the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement.
Specification:
- Time to results : 60 seconds
- Sample size : 50 – 95 µL suitable for most patients
RAPIDLab® 348EX Blood Gas System
is the cost-effective solution for smaller laboratories tasked with the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement.
Specification:
- Time to results : 60 seconds
- Sample size : 50 – 95 µL suitable for most patients
Available on
RAPIDLab® 348EX Blood Gas System
is the cost-effective solution for smaller laboratories tasked with the challenge of performing fast-turnaround critical care tests. Fully-automated operation supports low-to-medium throughput on an easy-to-use analyzer that’s ready to generate accurate, on-demand results when clinicians need them, with a minimum of operator involvement.
Specification:
- Time to results : 60 seconds
- Sample size : 50 – 95 µL suitable for most patients
RAPIDChem 744/754 Analyzer
Analyzers for rapid electrolyte and lithium testing in busy laboratories and clinics.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Li
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)
RAPIDChem 744/754 Analyzer
Analyzers for rapid electrolyte and lithium testing in busy laboratories and clinics.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Li
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)
Available on
RAPIDChem 744/754 Analyzer
Analyzers for rapid electrolyte and lithium testing in busy laboratories and clinics.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Li
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)
FONMED EA-50 Electrolyte Analyzer
FONMED EA-50 is an Electrolyte Analyzer for measuring electrolyte levels in the human body. Used in quantitative measurements of Sodium (Na+), Potassium (K+), Calcium (Ca2+), Chloride (Cl-) and pH in urine and serum samples.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Ca2+, pH
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)
FONMED EA-50 Electrolyte Analyzer
FONMED EA-50 is an Electrolyte Analyzer for measuring electrolyte levels in the human body. Used in quantitative measurements of Sodium (Na+), Potassium (K+), Calcium (Ca2+), Chloride (Cl-) and pH in urine and serum samples.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Ca2+, pH
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)
Available on
FONMED EA-50 Electrolyte Analyzer
FONMED EA-50 is an Electrolyte Analyzer for measuring electrolyte levels in the human body. Used in quantitative measurements of Sodium (Na+), Potassium (K+), Calcium (Ca2+), Chloride (Cl-) and pH in urine and serum samples.
Specification :
- Sample type : Whole Blood, Plasma, Serum and/or Diluted Urine
- Parameter : Na+, K+, Cl-, Ca2+, pH
- Analysis Time : Serum/Plasma/Blood 35 seconds, Urine 60 seconds (Na+/K+/Cl-)